Home > Arduino & SCM Supplies > 1.54inch
1.54inch Three-Color E-Ink Display Module for Raspberry Pi/Nucleo
200x200£¬ 1.54inch E-Ink display module£¬ three-color£¬ SPI interfaceOverviewThis is an E-Ink display module£¬ 1.54inch£¬ 200x200 resolution£¬ with embedded controller£¬ communicating via SPI interface£¬ supports red£¬ black£¬ and white three-color display. Due to the advantages like ultra low power consumption£¬ wide viewing angle£¬ great effect under sunlight£¬ it is an ideal choice for applications such as shelf label£¬ industrial instrument£¬ and so on. FeaturesNo backlight£¬ keeps displaying last content for a long time even when power downUltra low power consumption£¬ basically power is only required for refreshingSPI interface£¬ for connecting with controller boards like Raspberry Pi/Nucleo£¬ etc.Comes with development resources and manual (examples for Raspberry Pi/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI£¬ 4-wire SPIOutline dimension: 48mm × 33mmDisplay size: 27.6mm × 27.6mmDot pitch: 0.138 × 0.138Resolution: 200 × 200Display color: red£¬ black£¬ whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection£¬ low active DCData/Command selection (high for data£¬ low for command) RSTExternal reset£¬ low active BUSYBusy status output£¬ low active