Home > Arduino & SCM Supplies > 264x176£¬
264x176£¬ Three-color£¬ 2.7inch E-Ink Display HAT For Raspberry/Arduino
264x176£¬ 2.7inch E-Ink display HAT for Raspberry Pi£¬ three-color£¬ SPI interfaceOverviewThis is an E-Ink display HAT for Raspberry Pi£¬ 2.7inch£¬ 264x176 resolution£¬ with embedded controller£¬ communicating via SPI interface£¬ supportsred£¬ black£¬ and white three-color display. Due to the advantages like ultra low power consumption£¬ wide viewing angle£¬ great effect under sunlight£¬ it is an ideal choice for applications such as shelf label£¬ industrial instrument£¬ and so on. FeaturesNo backlight£¬ keeps displaying last content for a long time even when power downUltra low power consumption£¬ basically power is only required for refreshingCompatible with Raspberry Pi 2B/3B/Zero/Zero WOnboard 4x KeysSPI interface£¬ for connecting with other controller boards like Raspberry/Arduino/Nucleo£¬ etc.Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) SpecificationsOperating voltage: 3.3VInterface: 3-wire SPI£¬ 4-wire SPIOutline dimension: 85mm × 56mmDisplay size: 57.288mm × 38.192mmDot pitch: 0.217 × 0.217Resolution: 264 × 176Display color: red£¬ black£¬ whiteGrey level: 2Refresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170° InterfaceSYMBOLDESCRIPTION VCC3.3V GNDGround DINSPI MOSI pin CLKSPI SCK pin CSSPI chip selection£¬ low active DCData/Command selection (high for data£¬ low for command) RSTExternal reset£¬ low active BUSYBusy status output£¬ low active