Home > Electronics > 3D Printer & Supplies > 3D Printer Accessories
3Pcs HTD5M-300 Timing Pulley Belt Rubber Drive Arc Teeth 20mm Width 1/5'' Pitch For 3D Printer
Features: Dynamic flexing is good, anti-cracking performance Ozone excellent performance Resistance to aging, heat, oil, wear-resistant Synchronous belt drive with accurate transmission ratio, no slip, constant ratio can be obtained, precision transmission, smooth transmission, shock absorption, noise, transmission speed ratio range Specification: Name: HTD5M-300 Belt Style: HTD5M Series Belts Positive Drive Model:HTD5M-300 (HTD300-5M) Belt Width: 20mm Material: Chloride butyl rubber + Glass fibre + High elastic nylon canvas Parameters: Teeth type:Circle-arc tooth Teeth number:60 Whether standard parts: Standard parts Pitch: 5.00mm Tooth height: 2.06mm Belt thickness: 3.8mm Minimum allowable bending diameter: 25 Tensile strength: 160N/mm Reference load: 130N/mm Elongation: 4.0% Hardness(shore A):755 Adhesion strength of cloth: 6N/mm Adhesion strength of core rope: 400N/mm Gear shearing intensith: 50N/mm Package include: 3 x 20mm HTD5M-300 Timing Belt Note: 1. Prohibited twists and turns, so as not to damage the skeleton material, affecting the belt strength. 2. Do not scratch the belt, so as not to cause early damage to the belt. 3. Prohibit the long-term and oil, water and other substances in long-term contact, to avoid contact with chemicals. 4. In the replacement of timing belt, belt tension must be reduced to a minimum in order to remove, forbidden timing belt in the case of high tension, the use of non-professional tools hard pry down.