Home > Electronics > Arduino Compatible SCM & DIY Kits > Smart Robot & Solar Panel
4WD Wireless IR Remote Control Smart Car Arduino Kit for ATmega328P UNO R3 with IR Controller/UNO R3 Motherboard/TT Motor
Introductions: The kit is a wireless remote control smart car kit based on the ATmega328P UNO-R3 motherboard. The PCB chassis is compatible with the ATmega328P motherboard, making it easy to install UNO-R3 or other compatible motherboards. According to the installation video assembly car, each step has a clear explanation, the installation is very simple. The geared motor and battery holder are easy to install and plug and play. Ultrasonic sensor HC-SR04 can be installed Can also be controlled directly using a Bluetooth module, etc. Direct control of the car with an infrared remote control TT geared motor and welded leads, small size, large torque, long life and easy to use This kit helps you learn ATmega328P UNO-R3 programming and learn to make fun projects. Very suitable for the DIY smart car project About TT motor: - Operating voltage: 3V-6VDC - No-load speed: 125 rev / min @ 3V, 208 rev / min @ 5V - No-load current: 150mA@3V, 175mA@5V - Reduction ratio: 1:48 - Torque: 0.8kg.cm (maximum) - Line length: 20cm Pacakge Included: 1 x chassis plate 1 x UNO-R3 motherboard 1 x USB cable (50 cm) 1 x IO expansion board 1 x multi-angle infrared receiver module 1 x active buzzer module 4 x TT motor (welded wire) 4 x motor mounting assembly 4 x tire 1 x 14500 battery case 1 x Phillips screwdriver 3x75mm 1 x 40P female pair busbar 1 x white nylon rivets 12 x black nylon rivets 3 x copper column (M3x6+6mm) 3 x hex nut (M3x2.5) 6 x steel screw (M2x6) 2 x copper column (M2*25) 3 x screws (M3x5) 1 x infrared remote control