Home > Arduino & SCM Supplies > AVR
AVR ISP Shield Burning Bootloader Programmer for Arduino UNO R3
This is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards. On-board buzzer and LED indicators£¬ indicating whether the burning is successful£¬ it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual£¬ it is very easy to use. Features: - Compatibility: As it uses SPI pins of ICSP interface£¬ compatible with Arduino UNO R3 / Arduino Mega2560£¬ can change to the bootloader burner when it is directly plugged onto the two boards. - Operating voltage: 5V - Operating current: 500mA (max) - Arduino board to be burned: support Arduino UNO R3 / Mega 2560 / Nano / pro mini (5V 16M) - On-board buzzer£¬ if the fuse bit is successfully modified£¬ it will sound once£¬ and then if burning bootloader is OK£¬ it will sound once again. If it is not two beeps£¬ burning is failed. You can capture the sound instead of LED lights£¬ so this will improve the efficiency of burning. - On-board LED indicators£¬ HEART BEAT led lights up like a breathing light when powered normally. During programming£¬ the PROG indicator flashes until it finishes. If the programming is unsuccessful£¬ the ERROR indicator (red) will light. - Onboard 28P locking seat for Atmega328P£¬ Atmega168P£¬ Atmega8 bootloader burning - Onboard ISP_6 PIN interface£¬ for the external Arduino board bootloader burning - On-board ISP_10 PIN interface - On-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.