Home > Arduino & SCM Supplies > CJMCU
CJMCU LIS3DSH 3 Axis High Resolution Accelerometer Module - Purple
LIS3DSH CJMCU is built-in 2 finite state machine three axis high resolution accelerometer module This link module uses the ST original chip model: LIS3DSH LIS3DSH is a super low power high performance three axis linear acceleration of the "nano" embedded state machine family£¬ can be programmed to achieve independent application. The LIS3DSH has a dynamically selectable + 2G / + 4G / + 6G / + 16 g full scale£¬ which is capable of measuring the output data rate of acceleration from 3.125Hz to 1.6KHz. Self checking function allows the user to check the function of the sensor in the final application. The device can be configured to generate an interrupt signal that is activated by a user defined movement pattern. The LIS3DSH has an integrated first£¬ first out (FIFO) buffer that allows the user to store data to reduce the host processor's intervention. LIS3DSH is packaged in a small thin plastic grid array (LGA)£¬ which guarantees working at the extended temperature range from -40 C to +85 main features Wide supply voltage: 1.71 V to 3.6 V Independent IO power supply (1.8V) and power supply voltage compatible Ultra low power consumption of +/- 4g / +/-?6g / +/-?8g / +/-?2g / +/-?16g dynamic optional full scale IIC / SPI digital output interface 16 bit data output Programmable embedded state machine Embedded temperature sensor Embedded self test Embedded advanced first in£¬ first out 10000g high impact resistance