Home > Arduino & SCM Supplies > DIY
DIY 5V/12V 1 Channel Jog&Self-locking WiFi Wireless Smart Home Switch
WIFi control model£¬ no need to program. No matter where you are£¬ you only need to download a APP to connect the wifi and control the cloud. Features: - Two working voltage: USB 5V and DC 7V~13V - With signal instruction light and relay pull-on instruction light - Power < 1W£¬ and quiescent current:80mA - Cutover current< 10A £¬ Cutover voltage< 250V - 10A Relay Model - The life of Relay Model is more than 1£¬000£¬000 - Insulation resistance: 100M - Maximum pull-on time: 15mS - Maximum release time: 5mS - Working Temperature: -40 to 70degree - Working Humidity: 40% to 80% RH Function: 1. Default inching Function: Press the open relay by mobile phone£¬ then cut off the pull-on imediately(default one second)£¬ it has the timing-share function at the same time. 2. Self-locking when press the inching and locking button with the light on. Press open relay to pull-on£¬ press close relay to cut off. Features: 1. With signal instruction light and relay pull-on instruction light 2. Power < 1W£¬ and quiescent current:80mA 3. Cutover current< 10A £¬ Cutover voltage< 250V 4. 10A Relay Model 5. The life of Relay Model is more than 1£¬000£¬000 6. Insulation resistance: 100M 7. Maximum pull-on time: 15mS 8. Maximum release time: 5mS 9. Working Temperature: -40 to 70degree 10. Working Humidity: 40% to 80% RH Function: 1. Default inching Function: Press the open relay by mobile phone£¬ then cut off the pull-on imediately(default one second)£¬ it has the timing-share function at the same time. 2. Self-locking when press the inching and locking button with the light on. Press open relay to pull-on£¬ press close relay to cut off. More details please referf to download link;