Home > Arduino & SCM Supplies > DIY
DIY L298N Dual H Bridge DC Stepper Motor Driver Board Module - Black
The L298N driver module£¬ using ST's L298N chip can directly drive two 3~30V DC motor£¬ and provides a 5V output interface can 5V single-chip circuitry to supply£¬ support 3.3VMCU control£¬ you can easily control the DC motor speed and direction£¬ you can also control the 2-phase stepper motor£¬ smart car essential. Features: Driver: L298N Dual H Bridge DC Motor Driver IC Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board£¬ the supply area Vs: +7 V ~ +35 V Driven part of the peak current Io: 2A The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V) The logical part of the operating current range: 0 ~ 36mA Control signal input voltage range: Low: -0.3V High: 2.3V Enable signal input voltage range: Low: -0.3 High: 2.3V Maximum power consumption: 20W (when the temperature T = 75 Deg C) Storage temperature: -25 Deg C ~ +130 Deg C Other Extensions: control of direction indicators£¬ the logic part of the plate to take power interface. Other Function: Other functions: control the direction indicator£¬ power indicator£¬ current detection£¬ the logic part of the board to take power interface. The L298N driver module£¬ using ST's L298N chip can directly drive two 3~30V DC motor£¬ and provides a 5V output interface can 5V single-chip circuitry to supply£¬ support 3.3VMCU control£¬ you can easily control the DC motor speed and direction£¬ you can also control the 2-phase stepper motor£¬ smart car essential.