Home > Arduino & SCM Supplies > Geeetech
Geeetech Single Channel RF Wireless Relay Remote Control Module
This one-channel multifunction RF receiving controller is for sending open signal and close signal to one relay. It can be used to turn on/ off£¬ connect/disconnect or implement other specific controlling program on the controlled devices or motor. Typical applications for relays include fields of electronically operated gate£¬ windows£¬ lifting appliance£¬ switch£¬ lifter£¬ industrial control£¬ security industry etc. The RF controller has the advantages of high confidentiality£¬ high stability£¬ low power£¬ and use expediently; no need for traditional connecting wire or dial fixing code switch£¬ all you need to do is learning to match the code of the remote controller with the receiving controller. Output mode: The output mode of this controller is usually divided into non-lock£¬ interlock and self-locking.( note that you can switch the mode directly without deenergization) 1. Self-lock—— short-circuit 1£¬ 2 with jumper cap 2. Interlock——short-circuit 2£¬ 3 with jumper cap 3. Non-lock——disconnect the jumper cap Learning method: press the learning key after switched on£¬ you can begin learning after the led indicator blinks. Press any key to send signals within 20 seconds£¬ if the led indicator blinks and light off£¬ the learning process succeeds and the remote controller can work now. Clear the code: if the learned controller gets lost£¬ you just need to clear the existing signal code of the receive by long pressing the learning key for about 6 seconds until the led indicator lights off. The new remote controller cannot control the receiver directly£¬ you need to learn and set again. Features: This receiver controller is of high confidentiality and large storage; it can store information of as much as 30 remote controllers with different codes. This receiver can receive all kinds of fixed-code£¬ learning code and other high-bit-rate remote controller regardless of the oscillation resistance. (Rolling codes not included.) NOTE: This remote control doesn't included 23A 12V battery Technical Spec: 1. Operating voltage: DC12V 2. Operating current: ≤60mA 3. Load control: alternating current/direct current 4. Output current: ≤10A 5. Operating frequency: 315MHz 6. Receiver sensibility: -105dbm 7. Operating temperature: -30¡æ - +70¡æ 8. Size: 50 x 34 x 18mm 9. Weight:50g(including the remote controller) 10. Remote control distance: 150m (in wide-open area)