Home > Arduino & SCM Supplies > Hengjiaan
Hengjiaan DC 3V~7.2V to 200KV Boost Step-up Power Module - Black
Description: input voltage: DC 3 V to 7.2 V Input current: 2 A - 5 A High pressure type: the type of pulse current Output voltage: 200£¬000V (Please pay attention to safety) High pressure discharge distance between: 10 mm - 20 mm The output high voltage wire length: 100 mm Input power cord length: 100 mm (the red line is positive) Wiring: Red and green power connection red line:"+" green line "-" output : the other side £¬same color cable Please notice: the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line £¬ battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible £¬ you must provide enough current ) . Experimental test of the arc distance from short to long £¬ Do not exceed the maximum arc distance electricity£¬ energy can not be released due to high pressure £¬ can easily damage the module. ) Work: intermittent £¬ continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module Bullet point: input voltage: DC 3 V to 7.2 V< Input current: 2 A - 5 A High pressure type: the type of pulse current Output voltage: 200000V (Please pay attention to safety) High pressure discharge distance between: 10 mm - 20 mm