Home > DIY Parts & Components > Mini
MiNi 0-100V/100A Digital DC Voltage Current Measurement / Red+Blue LED Dual Display +Shunt
Brand N/A Model N/A Quantity 1 Color Black Material Plastic Specification Operating voltage:DC 4.5 ~ 30V Measure voltage: DC 0 ~ 100V Minimum resolution(V): 0.1V Measure current:100A (require external shunt) Minimum resolution(A): 0.1A Operating current: <20mA Display: three 0.28 LED digital tube Display color: Red and Blue (two-color display) Dimensions: 48 x 29 x 21mm Mounting cutout: 45.5 x 26.5mm Refresh rate: about 500mS / times Measure accuracy: 1% (¡À 1 digit) Operating temperature: -10 to 65¡ã c Operating Humidity: 10 to 80% (non-condensing) Working pressure: 80 to 106 kPa Features Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement; Wiring: Black line (thin): vacant or buck circuit (module) negative; Red line (thin): power supply+; Black line (thick): COM£¬ common measuring; Red line (thick): PW+£¬ measuring terminal voltage input positive; Yellow line (thick): IN+£¬ current input+; Application Notice: The voltage between the thin red and thin black lines must be within DC 4.5-30V; The ammeter can only be connected to the negative of the device under test; Exceeds 5A£¬ long-term full load working continuously£¬ it is recommended that the measurement side of the leads are directly soldered to the socket; When the black thin line vacant£¬ it is better to use insulating tape around the exposed part of the wire£¬ to prevent short circuits If just be used as a voltmeter£¬ it is recommended that the yellow line and the black line were connected together£¬ to prevent the ammeter digital flashing. English Manual/Spec YES Packing List 1 x Digital Volt Amp Meter 1 x 100A/75mV DC Current Shunt