Home > Arduino & SCM Supplies > OPEN-SMART
OPEN-SMART Rich UNO R3 Atmega328P Development Board Module Kit
NOTE: You can go to our google drive to watch the video and download the documents. This is a rich multifunctional kit for Arduino with Rich UNO R3 board and 9 sensor module£¬ 3 display module and other accessories. You can use the kit to do many projects such as Speak Clock / Speak Temperature / Clock display / Infrared Remote Control / Touch Control MP3 / MP3 Player / Ultrasonic Distance Measurement. Compatible with Arduino UNO R3£¬ OPEN-SMART UNO R3 is an ATMEGA328P development board. The kit contains TF card£¬ speaker£¬ CR1220 battery£¬ infrared remote control£¬ and these are the necessary accessories for MP3£¬DS1307£¬ infrared receiver. And it contains ultrasonic sensor / water sensor / PIR motion sensor / light sensor / vibration motor / I2C 1602 display£¬ etc. 4 digit display: 4 digit tube (0.36 inches) which can display the clock point£¬ it needs 2 pins to control and display the integer£¬ clock£¬ stopwatch£¬ score and so on. DS1307 clock: based on DS1307 high-precision real-time clock module£¬ I2C interface£¬ the address is 0x68. Infrared receiver: It can receive the modulated infrared signal of 38KHz that is sent by the IR transmitter module and demodulate it into logic level£¬ and it can complete the infrared remote control with the codec program. Serial MP3: MP3 music player module is based on high-quality MP3 music chip£¬ use D7 / D8 pins to be software serial port£¬ you can send commands to switch songs£¬ change the volume and play mode and other operations. Rotation angle sensor: 10K ohm adjustable potentiometer knob angle sensor£¬ use A0 pin£¬ can be used for MP3 volume adjustment£¬ 4-digit display brightness adjustment. 4-CH touch sensor: capacitive touch switch£¬ only when you touch the corresponding position with your fingers£¬ the module corresponding pin will output high level£¬ otherwise it outputs low. NTC Temperature Sensor: can measure the temperature directly in the water. Vibration Motor: a mini vibration motor suitable as a non-audible indicator. I2C 1602 LCD: a high-quality 2 line 16 character LCD module with I2C interface and it is a basic character LCD screen for lots of applications. Features: - Use Arduino UNO bootloader - It is 100% compatible with Arduino UNO R3 program£¬ expansion shields£¬ IDE. - Peripheral modules are rich in type£¬ rich library£¬ simple sketch codes£¬ easy functions to use. - Use through hole mount type B USB connector£¬ consistent with Arduino UNO R3£¬ ruggedness and long service life. - You can burn the program with the type A male to type B male cable. - Onboard 500mA resettable fuse to protect power supply from the USB port and the DC jack at the same time. - USB interface driver chip: CH340G£¬ compatible with win7£¬ win8£¬ linux£¬ MAC OS. - Microcontroller: Atmel ATmega328P - Working voltage: 5V - IO logic voltage: 5V - Working current: 500mA (Max) - Digital I/O Pins: 14 (of which 6 provide PWM output) - Flash Memory: 32 KB of which 2 KB used by bootloader - SRAM: 2KB - EEPROM: 1KB - Clock Speed: 16 MHz