Home > Arduino & SCM Supplies > Open103C
Open103C Standard STM32 Microcontroller Development Board Kit - Blue
Color: Blue - Material: FR4 - Open103Z is a STM32 development board that features a STM32F103RCT6 device as the microcontroller - There are further expansions with various optional accessory boards for specific application - The modular and open design makes it the ideal for starting application development with STM32F family - Power supply switch: 5V DC or USB - Power indicator - LEDs: Convenient for indicating I/O status or program debugging running state - Reset button - User key - Joystick: Convenient for I/O input (five positions) - 32.768K crystal oscillator: Used for internal RTC - 8M crystal oscillator: Enables the MCU run at 72M frequency by frequency multiplication - 8-bit I/O Interface: easily connects to keypad£¬ motor£¬ etc. - CAN Interface: Communicates with accessory board which features the CAN device conveniently - SPI1 / SPI2 Interface: easily connects to SPI peripherals such as FLASH (AT45DBxx)£¬ SD card£¬ MP3£¬ etc. - I2C1 / I2C2 Interface: easily connects to I2C peripherals such as I/O expander(PCF8574)£¬ EEPROM (AT24Cxx)£¬ etc. - LCD port - One wire port - USART1 Interface: easily connects to RS232£¬ RS485£¬ USB TO 232 - USART2 Interface: easily connects to RS232£¬ RS485£¬ USB TO 232 - USB Port: USB communication between board and PC - 5V DC jack - 5V/3.3 V power input/output - MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion - JTAG/SWD interface: For debugging/programming - Boot mode selection: for configuring the BOOT0 and BOOT1 pins - USB enable jumper - Short the jumper to enable the PC auto detection while USB connecting - Open the jumper to disable - LEDs Jumper - Short the jumper to connect the LEDs to default I/Os - Open the jumper to connect the LEDs to custom I/Os via DuPont wires; - VBAT selection jumper - Short the jumper to use system power supply - Open the jumper to connect the VBAT to external power£¬ such as battery - Package includes: - 1 x Open103Z development board - 1 x PL2303 USB UART board - 1 x USB type A connecting cable (90cm) - 1 x 100~240V power adapter (US plug / 80cm cable) - 1 x USB cable (80cm) - 2 x 2-pin connecting cable (18cm) - 2 x 4-pin connecting cable (18cm) - 1 x Software CD