Home > Arduino & SCM Supplies > Open103Z
Open103Z Package A STM32 Microcontroller Development Board Kit - Blue
Color: Blue- Material: FR4- Core: ARM Cortex-M3 32-bit RISC- Operating frequency: 72MHz£¬ 1.25 DMIPS/MHz- Operating voltage: 2~3.6V- Memories: 512K flash£¬ 64K RAM (the highest specification in STM32F103Z series)- Communication interfaces: 3 x SPI£¬ 5 x USART£¬ 2 x I2S£¬ 2 x I2C£¬ 1 x FSMC£¬ 1 x LCD£¬ 1 x SDIO£¬ 1 x USB£¬ 1 x CAN- AD & DA converters: 3 x AD (12bit£¬ 1us£¬ shares 21 channels)£¬ 2 x DA (12bit)- Debugging / Programming: Supports JTAG/SWD (serial wire debug) interfaces£¬ supports IAP- 74LVC139: Used for FSMC expansion£¬ makes it possible to connect multi peripherals through FSMC at the same time£¬ such as connecting a LCD and a NAND FLASH- Power supply switch: 5V DC or USB- Power indicator- LEDs: Convenient for indicating I/O status or program debugging running state- Reset button- User key- Joystick: Convenient for I/O input (five positions)- 32.768K crystal oscillator: Used for internal RTC- 8M crystal oscillator: Enables the MCU run at 72M frequency by frequency multiplication- SDIO Interface: Connects to the Micro SD Board easily£¬ It is much faster to read/write the Micro SD card via SDIO than via SPI- 8-bit I/O Interface: easily connects to keypad£¬ motor£¬ etc.- CAN Interface: Communicates with accessory board which features the CAN device conveniently- SPI Interface: easily connects to SPI peripherals such as FLASH (AT45DBxx)£¬ SD card£¬ MP3£¬ etc.- I2C Interface: easily connects to I2C peripherals such as I/O expander(PCF8574)£¬ EEPROM (AT24Cxx)£¬ etc.- PS/2 Interface: easily connects to PS/2 keyboard or mouse- USART1 Interface: easily connects to RS232£¬ RS485£¬ USB TO 232- USART2 Interface: easily connects to RS232£¬ RS485£¬ USB TO 232- FSMC Interface: easily connects to FSMC interface£¬ such as NorFlash (S29GL128P)£¬ SRAM (IS62WV51216BLL)- USB Port: USB communication between board and PC- 5V DC jack- 5V/3.3 V power input/output- MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion- JTAG/SWD interface: For debugging/programming- Boot mode selection: for configuring the BOOT0 and BOOT1 pins- USB enable jumper- Short the jumper to enable the PC auto detection while USB connecting- Open the jumper to disable- PS/2 interface jumper- Short the jumper to connect the PS/2 device to default I/Os- Open the jumper to connect the PS/2 device to custom I/Os via DuPont wires- LEDs Jumper- Short the jumper to connect the LEDs to default I/Os- Open the jumper to connect the LEDs to custom I/Os via DuPont wires;- VBAT selection jumper- Short the jumper to use system power supply- Open the jumper to connect the VBAT to external power£¬ such as battery- Package includes:- 1 x Open103Z development board- 1 x PL2303 USB UART board- 1 x LCD board- 1 x Analog test board- 1 x SN65HV board- 1 x AT24CXX EEPROM board- 1 x Micro SD storage board- 1 x K9F1G08U0C NandFlash board- 1 x S29GL128P NorFlash board- 1 x IS62WV12816BLL SRAM board- 1 x Network cable (1.5m)- 1 x 100~240V power adapter (US plug / 80cm cable)- 1 x USB cable (80cm)- 2 x 2-pin connecting cable- 2 x 4-pin connecting cable- 1 x Software CD