Home > Electronics > Arduino Compatible SCM & DIY Kits > Arduino Compatible Kits & DIY Kits
Original JYETech DIY FG085 DDS Digital Synthesis Function Generator Unassembled Kit With Panel
Note: This kit not include the power supply. This kit with panel, if you need no panel version, please search item:974905 Please click here to download the Assembly Guide Feature: The output signal types: sine, square, triangle, positive and negative sawtooth, positive and negative staircase, user-defined arbitrary waveforms, and servo control signal Frequency range: 0 - 200KHz (sine) Frequency resolution: 1Hz Frequency accuracy: 0.149Hz (when F> 40Hz time) 0.000596Hz (when F <= 40Hz time) Cycle Resolution: 1ms Amplitude range: 0 - 10V pp Amplitude accuracy: 0.1V DC offset range: -5V - + 5V DC offset Accuracy: 40mV Waveform memory depth: 256 bytes Maximum sample rate: 2.5Msps Trigger Input Level: High 3.5V (minimum) low 1.5V (maximum) When the trigger waveform output delay: less than 5 subtle Synchronous output: TTL level Output Impedance: 50 ohm Power supply voltage: 15V DC Supply Current: <150mA (no load) Example: 1) The output frequency is set to 5KHz, key operation: [F / T] [5] [KHz] 2) the output amplitude is set to 3V peak to peak, key operation: [AMP] [3] [V] 3) The DC offset is set to -2.5V, key operation: [OFS] [+/-] [2] [5] [V] [.] The main operating modes: Fixed-frequency mode (CW) Sweep mode (SWEEP) Servo signal patterns (SERVO) Package included: 1 x FG085 DDS Digital Synthesis Function Generator Kit With Panel