Home > Arduino & SCM Supplies > Pro
Pro Mini UNO Shield Adapter + Pro Mini Board + Programmer for Arduino
About Pro Mini Board: NOTE: The board type of this Pro mini board in the Arduino IDE is Arduino Pro or Pro Mini (5V£¬ 16 MHz) w/ ATmega328. - It is 100% compatible with the program£¬ expansion shields£¬ IDE of Arduino Pro mini(5V / 16MHz). - Can be directly programmed with the CH340G USB to TTL adapter module. - On-board reset button. - Microcontroller: Atmel ATmega328P. - Operating Voltage: 4.5 - 5.5V. - Digital I/O Pins: 14 (of which 6 provide PWM output). - Analog Input Pins: 6 - Flash Memory: 32 KB of which 2 KB used by bootloader. - SRAM: 2 KB. - EEPROM: 1 KB. - Clock Speed: 16 MHz. About Mini-UNO Shield Adapter: This is Arduino Pro Mini to UNO Shield Adapter Board. Red board and the colorful female pin headers make your project more impressive. - Dedicated to the Arduino Pro Mini board and other compatible board - More convenient to connect the peripheral module to Pro Mini board - Compatible with the pin definitions Arduino UNO R3 - Onboard 500mA resettable fuse to protect power supply from the USB port and the DC jack at the same time. - Leads out more GND£¬ 5V pins£¬ UART serial interface and I2C interface£¬ so it is more convenient to connect it to peripheral modules without additional IO expansion shield. - Onboard 5V and 3.3V voltage regulator circuit - Onboard DC jack socket and it can be powered by an external battery so it allows you to show your projects in the outdoor without the PC. - Working voltage: 5V - Working current: 500mA (Max) - External input voltage: 7-12VDC About CH340G programmer: This is USB to serial module that is based on the CH340G. It comes with a beautiful case which is dust-proof£¬ anti-static£¬ ruggedness and it has a longer service life. It is commonly used to debug various TTL serial devices such as serial WIFI£¬ serial MP3 and serial camera module£¬ upgrade the firmware of routers£¬ and burn program onto Arduino Pro Mini£¬ LilyPad Arduino directly. Features: - Operating Voltage: 5V. - Logic Voltage: 5V. - Pins: GND(black)£¬ 5V(red)£¬ TX(yellow)£¬ RX(white)£¬ DTR(blue) - Serial baud rate: Up to 115200bps. - Support USB1.1£¬ USB2.0£¬ USB3.0. - USB to serial chip (CH340) supports XP£¬ win7 / win8 32bits£¬ 64bits£¬ Linux£¬MAC