Home > Arduino & SCM Supplies > RF1100SE
RF1100SE Transceiver Programming Module w/ Antenna - Green
Model: RF1100SE- Quantity: 1- Color: Green- Material: PCB board- Working voltage: 1.8V~3.6V (Recommend 3.3V)- 433MHz band certification-free usage- Max. Working efficiency 500Kbps£¬ which support 2-FSK£¬ GFSK and MSK modulation - Modify baud rate with software£¬ better requirement for customers in different conditions of use- High baud rate£¬ faster data transfer rate- Low baud rate£¬ more strong anti-jamming and penetration ability£¬ the transmission distance further - High sensitivity (1.2 Kbps down-110 dBm£¬ 1% packet ber)- Built-in hardware CRC (inspection wrong and point-to-multipoint address control)- Lower consumption (RX£¬ 15.6 mA£¬ 2.4 Kbps£¬ which 433 MHz)- Can be programmed to control the output power£¬ for all the support frequency can reach +10 dBm- Waken wireless£¬ support low power electromagnetic wave activated£¬ and wake on lower consumption device- Before transmission channel access will be cleaned up automatically (CCA)£¬ named carrier protected reliably against detective system- Fast frequency changes brought the right frequency synthesizer jumping system- Module can be set address software£¬ software programming is very convenient- The standard DIP spacing interface£¬ easy to embedded applications- Separate 64 bytes RX and TX data FIFO- Open the actual transmission distances of up to 200 meters above (depending on the specific environment and- Great for DIY project