Home > Electronics > 3D Printer & Supplies > 3D Printer Filament
SparkMaker 500ml/bottle 355-420nm UV Sensitive Resin Liquid Printing Material For DLP/LCD/SLA 3D Printer
Specifications: LCD style Resin: LCD-E / LCD-T / LCD-W / LCD-N /LCD-C five style. 500g/bottle(all color clear except LCD-N gray) Hardness: 79 D Viscosity(25): 552 mpa.s Curing wavelength: 405 nm Liquid density: 1.1 Solid density: 1.184 g/cm Shrinkage: 7.1% Tensile strength: 23.4 Mpa Curing time: 6-10 s Elongation at break: 14.2% Shelf life: 1 year Be applicable: curing between 355-420nm most of DLP/LCD/SLA 3D Printer curing 405nm(include anycubic photon) Note: If you find that the resin is not suitable, please adjust it to the appropriate parameter range according to the parameters of your 3D printer. Terms and Conditions: Shake well before use, please wear a glove mask, the recommended temperature 20-25 to avoid dust and the environment. Precautions: This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly. Save notes: It is recommended to store at 15 -35 ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin. Package Included: 1x SparkMaker 500ml/bottle 355-420nm UV Sensitive Resin