Home > Arduino & SCM Supplies > VONETS
VONETS VM300 802.11b/g/n Wi-Fi Module Board for DIY Wi-Fi Repeater / Router - Green
Clocked of main chip580MHz 32Mb SDRAM£¬ can be extended 64MB; 4Mb SPI Flash£¬ can be extended 8Mb(Byte). Wi-Fi working frequency: 2.4GHz 2T2R dual antenna 300Mbps transmission rate. Support 1-14 Wi-Fi channels; Rated Power:< 3W; Output power of Module RF:15dbm~16.5dbm; Adopt the original creation D/A temperature compensated auto frequency control technologyTAFC£¬ make sure the lasting stability to ensure that the Wi-Fi signal is not dropped; Support 802.11b/g/n mode; Operating ambient temperature: -25~ 55'C; Two software: controllable operating modes: routing mode£¬ Bridge + Repeater mode; Supports intelligent transparent bridge mode£¬ also supports AP Client and AP Station. Support 3G/4G Module(3G USB Dongle) Independent hardware data processing£¬ does not consume host system resources£¬ without installing any drivers In bridge mode£¬ fool configuration to facilitate the secondary development implanted into other host systems. Built-in WEB configuration services£¬ available configure module parameters through the web. Built-in SOCKET monitoring services£¬ used to control two GPIO (1.5A) output£¬ nine kinds of GPIO control state to facilitate the secondary development and function expansion. Support VDNS technology£¬ in bridge mode£¬ can be configured via logging on the domain login page£¬ solve the problem that configure and secondary development. Two external antenna RF Female. Support for online firmware upgrade. Support open-wrt.